FAQs

Shop through our latest selection of Electronic & Gadget

How much warranty does my Soldering Iron come with?

Please see the warranty section of the website for more info.

No. We at Vimla Engineering only make pure 100% original Soldron products, and have not given anyone access to our trade secrets nor permission to sell as our sister brand. We have no branch and no equivalent in the market. Always insist on original Soldron products.

Please get in touch with the website immediately and demand that they take action against the seller and give you a replacement. If the website refuses to help, please get in touch with us via our contact page and we will help you get hold of original Soldron products.

We recommend purchasing original Soldron products from soldermall.com Plus you can get extra 6 months warranty if you buy on soldermall.com

This happens because the tip needs to be tinned when using the iron for the first time. Doing so will protect your bit from oxidation in the future and extend its life. How to tin-coat the bit: 1. While the Soldering Iron is Off and while it is room temperature and safe to touch, ensure the bit is securely and firmly attached to the element of the soldering iron 2. Keep ready a high quality solder wire of 5-10cm length to tin the bit with 3. Switch the Soldering Iron On 4. While the iron is heating keep the solder wire on the tip wait till it starts melting 5. Make sure to generously melt at least 5-10cm of solder wire onto the entire tip section of the bit evenly 6. Place the iron safely in a deluxe-soldering-iron-stand (Sold separately)
If you are not using the Soldering Iron always switch off the soldering iron and unplug it from the wall socket. Wait till the iron is cool before storing it. Avoid leaving the Soldering iron on for extended periods of time. Success! Now your bit will last longer than if the bit were not tinned. IMPORTANT: Every bit before initial use whether bought as a spare or if provided with an iron, must be tinned for optimum bit life.

If your tip is already oxidised due to extended use, do the following: 1. Get some steel wool 2. Gently remove the oxidation from the bit by scrubbing with steel wool, the end result should be a shiny tip. 3. Follow above instructions to re-tin tip 4. You should find that the iron will begin working properly again after tinning/re-tinning

No. Soldron was, is and always be manufactured by the same company: Vimla Engineering. If any shopkeeper tries to sell an another product citing that it is manufactured by our "brother"/"sister" brand or company, please do not buy from them. Please send us the details of the shopkeeper via the form on our contact page, we will take strict action against the shopkeeper.

Sorry, unless you purchased from soldermall.com, we cannot help you. This is because we at Soldron only recommend purchasing from official Soldron retailers. Besides soldermall.com we have not given authorisation to any other ecommerce site to sell our products.
soldermall.com is owned and run by our very own dealer, therefore you not only get peace of mind regarding obtaining original products, you also get 6 months extra warranty on Soldron Irons and Stations purchased from soldermall.com Vestibulum vestibulum parturient inceptos scelerisque neque a facilisis posuere sem ullamcorper scelerisque ac.

Yes! We are GST ready and you can avail rebate from the tax body if you purchase Soldron products. Our GSTIN is 27AACPA1320K1ZB.

There is simply no chance that any generic accessory can work better than an original Soldron accessory. T Our engineering is to the highest degree best suited to be used with our own designs. Do also keep in mind that you could be endangering your life and limb by using generic and low quality accessories with our products.

Our heavy duty irons such as SI100A and SI75Awould be best suited for soldering EV terminals together. The SI25A and SI35Amodels would best be suited for basic electronics and PCB soldering. For SMD connections, any of our soldering stations (some with attached blowers) would do.

Customer Support

Our experienced support team is here to help with queries, troubleshooting, and product guidance whenever you need it.

Fast Shipping

Enjoy fast, reliable delivery across India. We offer free shipping on orders of ₹499 or more so your tools reach you on time, every time.

Assured Quality

Every product undergoes strict quality checks before dispatch, ensuring you receive authentic, durable, and high-performing tools you can rely on.

35+ Years of Indian Expertise

Proudly designed and manufactured in India for over three decades, Soldron® delivers soldering tools meeting global standards for professionals and hobbyists alike.